WALK ON WATER:Have a blast in the NUCLEAR GLOBE and walk across the water! The unique cup-like construction on the outer surface grips and paddles through the water as you spin the globe. Features 6P PVC construction with patented Speed Safety Valves for fast and easy inflation, and two entry/exit portholes. Molded handles on the interior and exterior allow for easy entries and exits. Tying the “ultimate inflatable ball” to pool ladders, docks, or boats is easy with the integrated molded rope holder.
Maintain & Storage:
1. Disinfect and clean the ball regularly.
2. Check the ball before using. Any damage, please mend it with repair kit (material patches and glue).
3. After use, please remove sundries outside and inside the ball.
4. Before packing, make sure the ball is clean and dry. Then store it in cool and dry place.
1. Find out exactly where the leak is. Fill a spray bottle with a mixture of soap and water and spray it liberally on the ball along the seams. You will notice that the solution starts to bubble up where the leak is located, so take note of the position of the hole.
2. Prepare the hole for patching. Dry the seam off, and make sure that it is completely deflated before attempting to patch the seam. If you have the patch kit that came with the ball, you can use the prep solution to thoroughly clean the material (PVC or TPU) before proceeding. Rubbing alcohol also works.
3. Apply plumber’s glue to the seam and let it dry for about 15 minutes. If possible, apply some glue to the inside of the seam as well, so that it spreads out and gives an extra layer of protection when the ball pressurizes.
4. Fill the ball about halfway with air and wait another 30 minutes or so to make sure that the glue has dried completely.
5. Inflate the ball completely and spray it again with the soap and water mixture to make sure that the hole is indeed fixed.
Speed safety valves for fast inflation and deflation
Three chamber inflation
Constructed out of heavy-gauge PVC
Molded PVC handles inside
Molded PVC handles for outside entry
Two entry/exit portholes
Reinforced grommet system
Item may be tethered on sides to spin in a stationary position for pools or leashed for constrained area
0.9mm 28OZ PVC Tarpaulin. it is high durability fire-retardant PVC Tarpaulin, which has 3 layers, two coated side with a strong net inside. (The material is Water-proof and Fire resistance!)
It is one kind commercial grade fabric reinforced PVC material. Ideally suited for watersports, which can be used for maximum strength and durability.
Rapid Inflate Valve
This unique valve system offers the best possible combination of high air volume and ease of use.
Features beveled side wings for maximum stability and performance over waves and wakes. .
This product complies with all DIN EN 15649 product safety standards.
Lower Back Support:
Great for higher performance towing and also for lounging.
– Repair kit (including the material patches, glue and so on)
– Replaceable Valve
– Drain plug
-Air pump: CE air pump spec. 220V, 50HZ, 700W, plug can be customized.
– Oversized storage-carry bag